Standard HDD Head Combs Tool (2 Sets)

Standard Hard drive head swap replacement repair tool for Seagate, Western Digital, Samsung, Hitachi, Maxtor, Fujitsu, IBM HDDs.

Tool for: HDD head swap;
Suit for hard drives: Seagate, Western Digital, Samsung, Hitachi, Maxtor, Fujitsu, IBM, etc.
Suit for hard drive form factors: 2.5", 3.5";
Packing list: Standard HDD Head Combs Tool (16 head combs + head locking pins) x 2
Category: Hard drive repair tools - Hard drive head repair tool;

HDD Head Combs

Separate hard disk heads to prevent head damage.

HDD Head Combs Tool Features:

Practical Applications
Professional and friendly Simultaneous design to work on multiple heads separation at the same time; Consistent design to physically and equally separate the heads;

High Efficiency & Accuracy:
To ensure the easy move in/ out of the parking zones during the head replacement operation.

Physical effective head separation:
Maximize the security of head replacement while the ability of tremor resistance is increased;

Fix effectively:
Fix the head arms and head replacement toolkit by inserting the locking pins into the arms;

Manage Donor Heads Effectively:
Easily keep and manage your donor heads with head replacement toolkit so that you don't bother each time installing the donor heads back to the hard drives;

HDD Head Combs Tool Support List:

HDD head replacement tool kit support 55 models of hard drives.

101# 102# 103# 104# 121# 122# 123# 132# head combs support "heads stopped close to the center of the spindle motor" 3.5" hard drives;

201# 202# 203# 215# support "heads stopped on the outer track" 3.5" hard drives;

301#302# support "heads stopped on the outer track" 2.5" hard drives;

401# 403# support "heads stopped on the outer track" 3.5" hard drives with thick platters;

Because of various sizes and models, Hard drive head replacement tool kit can't support all hard drives at all, for hard drives which are not supported in this list, you can find the most suitable tool to match;

Note: Before you can use this tool very well, you need to have some experience of head replacement or have used familiar head replacement products or you need more practice on the toolkit, you should have clean room environment or at least one qualified clean bench. We are not responsible for any damage done directly or indirectly due to improper use of tools.