This tool is used to swap the BIOS chip on a hard drive PCB, the temperature can be set between 380-400 degrees. Small chip (BIOS) can be blown down directly, and large chip (Main Controller IC) can be blown in circles.
Power Voltage: 220V/110V;Plug type:EU/USBlower fan :Brushless FanAmount of Wind:120L/m(MAX)Temperature Range:100°-450°Discharge Feature:LED indicator lightHandle Length :120cmNoises :<45dbWeight:1.6KG;
Three steps to swap the BIOS chip:
1. Heat the BIOS chip to un-solder it from your original PCB;
2. Do the same with the donor PCB;
3. Solder the original BIOS chip on the donor PCB;
Tips: Most of the TV/Phone/Electronic Repair Shop can offer BIOS Chip Swapping service for just $5-20.
How-to video: How to transfer the BIOS Chip of the HDD PCB?
