WD Black 6TB WDB6003FZBX hard drive board

I have a WD Black 6TB WDB6003FZBX hard drive with a damaged power connector. Two pins are pushed in and 2 more are bent. Do you have a replacement board? Or, can I just replace the connector

Please advise the board number which is etched on the PCB, as the attached photo.

Sorry about the delay. I have been rebuilding my Win 10 since losing my MB

I have attached a screen shot of the WD Black 6TB board
The part # (?)
0836136
C02598_
Pr8814
0261

Also, not sure I can just replace the board because of Firmware conflicts?
Not the damaged pins. All 12V.

https://www.hddzone.com/wd6003fzbx-wd-pcb-0040b36131-p-4036.html is your donor PCB.

When you get this PCB, you need to move your original PCB’s BIOS to the replacement PCB. The 8pins (4 pins on each sides) with 25P05VP、25P10VP、25F512、25F1024、25F1024AN、SST25VF512、SST25VF010, etc. are the BIOS.