Seagate BarraCuda 8TB replacement PCB logic board for my hard drive

I was wondering when searching your site for a replacement PCB logic board for my hard drive. Seagate BarraCuda 8TB with board number 100815597 the following showed up in searching your site (ST8000DM004 Seagate PCB 100815597)

My question is mine has REV G after the number. And the listing description didn’t show a REV G just the other revisions. Would the board still work with my hard drive? I’m not concerned with recovering the data. Just getting to hard drive working for data backup storage. Thank you for your time and have a nice day.

For this PCB swapping, just need to check the board number.

When you get this PCB, you need to move your original PCB’s BIOS to the replacement PCB. The 8pins (4 pins on each sides) with 25P05VP、25P10VP、25F512、25F1024、25F1024AN、SST25VF512、SST25VF010, etc. are the BIOS.

Here’s the picture’s I took of my drive and PCB. I purchased it with a busted SATA port. I replaced it with an aftermarket one I had. Obviously it was busted intentionally because the PCB was bad. Just wanted to make sure yours would work.

If your HDD can’t spin, you can try.