How to repair Toshiba PCB G002915A

If a Toshiba hard disk drive with the PCB board G002915A inside has the following failure symptoms, you need to replace and repair it in order to recover data on it, this article will show you how to buy a matching donor (replacement) PCB G002915A and how to replacing it step by step.

Hard Drive PCB Failure Symptoms:

  • Hard drive can’t spin up (If you hear a tick, or do not hear or feel any movement, the PCB is probably defective);
  • A burning smell can be sensed coming from the hard drive; Burnt hard drive PCB components (“Motor Control Chip” burnt, “TVS Diodes” burnt, “Main Controller IC” burnt) on the PCB;
  • The HDD be connected to wrong power supply;
  • HDD PCB’s interface damaged;

Steps to repair Toshiba HDD PCB G002915A

Step 1: Find a donor Toshiba PCB G002915A
To buy a matching donor PCB for Toshiba HDDs, we need to make sure the “Board Number” on the PCB is the same. Board number is begin with “G00***”. Check the board number on your hard drive, make sure it is “G002915A“.

Steps to repair Toshiba HDD PCB G002915A
Toshiba PCB G002915A Board Number

Note: We have listed some models of hard drives which are using the G002915A PCB on hddzone.com for convenience, but to make sure, you’d better to unscrew your hard disk and have a look on the board.

Step 2: Buy Toshiba PCB G002915A Online

Then search with “G002915A” in the search box on HDDZone.com and order it online. HDDZone.com provide worldwide free shipping (7-20 business days), we also provide expedited shipping (3-7 days) such as DHL & UPS.

Steps to repair Toshiba HDD PCB G002915A
Search for Toshiba PCB G002915A On HDDZone.com

Step 3: Firmware Transfer on Toshiba PCB G002915A
In most cases, you need to transfer the “BIOS” chip (HDD firmware are usually stored in the “BIOS” chip or “Main Controller IC” chip) before you swap hard drive PCB, in order to make the donor board compatible with your HDD.

Steps to repair Toshiba HDD PCB G002915A
Toshiba PCB G002915A Firmware Transfer

Step 4: Recover and Backup Data
After the firmware transfer is completed, the Toshiba hard drive PCB G002915A replacement repair process is finished! Connect your HDD to your PC and restart your computer, you will be able to recover data from your HDD now! Backup! Backup! Backup!

Steps to repair Toshiba HDD PCB G002915A
Data Recovery & Backup

Tips: Most of the TV, phone, electronics repair shop can offer this firmware transfer service for just $5-20.

Related Links:

HDDZone.com provides all kinds of hard drive PCB boards. Free shipping worldwide!

HDD PCB Online Shop: HDDZone.com
Useful Guide: Hard Drive PCB Replacement

Contact US: Please feel free to contact us by email sales@hddzone.com.
Note: Send clear photos of your PCB (both sides) by attachments will make everything easier!