How to repair Fujitsu PCB CA26325-B18104BA

If a Fujitsu hard disk drive with the PCB board CA26325-B18104BA inside has the following failure symptoms, you need to replace and repair it in order to recover data on it, this article will show you how to buy a matching donor (replacement) PCB CA26325-B18104BA and how to replacing it step by step.

Hard Drive PCB Failure Symptoms:

Hard drive can’t spin up (If you hear a tick, or do not hear or feel any movement, the PCB is probably defective);
A burning smell can be sensed coming from the hard drive; Burnt hard drive PCB components (“Motor Control Chip” burnt, “TVS Diodes” burnt, “Main Controller IC” burnt) on the PCB;
The HDD be connected to wrong power supply;
HDD PCB’s interface damaged;

Steps to repair Fujitsu HDD PCB CA26325-B18104BA

Step 1: Find a donor Fujitsu PCB CA26325-B18104BA
To buy a matching donor PCB for Fujitsu HDDs, we need to make sure the “Board Number” on the PCB is the same. Board number is begin with “CA*** “. Check the board number on your hard drive, make sure it is “CA26325-B18104BA“.

Fujitsu HDD PCB CA26325-B18104BA
Fujitsu PCB CA26325-B18104BA

Note: We have listed some models of hard drives which are using the CA26325-B18104BA PCB on hddzone.com for convenience, but to make sure, you’d better to unscrew your hard disk and have a look on the board.

Step 2: Buy Fujitsu PCB CA26325-B18104BA Online
Then search with “CA26325-B18104BA” in the search box on HDDZone.com and order it online. HDDZone.com provide worldwide free shipping (7-20 business days), we also provide expedited shipping (3-7 days) such as DHL & UPS.

Search for Fujitsu HDD PCB CA26325-B18104BA
Search for Fujitsu PCB CA26325-B18104BA On HDDZone.com

Step 3: Firmware Transfer on Fujitsu PCB CA26325-B18104BA
In most cases, you need to transfer the “BIOS” chip (HDD firmware are usually stored in the “BIOS” chip or “Main Controller IC” chip) before you swap hard drive PCB, in order to make the donor board compatible with your HDD.

Fujitsu HDD PCB CA26325-B18104BA
Fujitsu PCB CA26325-B18104BA

Step 4: Recover and Backup Data
After the firmware transfer is completed, the Fujitsu hard drive PCB CA26325-B18104BA replacement repair process is finished! Connect your HDD to your PC and restart your computer, you will be able to recover data from your HDD now! Backup! Backup! Backup!

Data Backup
Data Recovery & Backup

Tips: Most of the TV, phone, electronics repair shop can offer this firmware transfer service for just $5-20.

Hard Drive PCB Failure Symptoms:

Steps to repair Fujitsu HDD PCB CA26325-B18104BA

Related Links: