100468303

Seagate Barracuda 7200.10 PCB 100468303

1. Seagate 250G pcb burned (100468303 revA) The logical board (100468303 revA) has burned during power up caused by a defective cable. Can someone to help me with a pcb schematics and with the components description? I need to replace the defective components. From my point of vew the burned component is a inductance but maibe I am wrong. Can you help wuth some information? Thanks.

2. Segatte 250GB SATA hard-drive with below details

Model Number: ST3250310AS
Product Number: 9EU132-305
Firmware: 3. AAC
Site Code: WU
Product of China
I have a Segatte 250GB SATA hard-drive with below details
Model Number: ST3200310AS
Product Number: 9EU132-305
Firmware: 3. AAC
Site Code: WU
Product of China
PCB Number:  100468303 REV A
Smooth Chip number(VCM): 100369972
BIG CHIP number(MCU): TTB5041A0

The PCB was burnt and I had got another PCB which matched PCB number, Smooth chip no, BIG chip number and I had the ROM(or BIOS chip) from the paitent to donor transferred. The drive spins fine, gets detected in BIOS but not in OS. When i use bootable media the drive gets detected there too. When I am running recovery via  bootable media it says the scan is going to take 600 hours ! The scan is very very slow.

Order this pcb online: 100468303

Order this pcb online: 100468303 V548A